How to maintain the dispenserDate: 2015-09-16
It is also very important to maintain the dispenser in a normal way. This can avoid sudden problems in the production process of the machine, thus delaying normal production. Ensuring that the machine can run and produce normally can bring higher efficiency and better benefits to the enterprise; it can also extend the life of the machine.
1. To change the rubber type, it is necessary to clean the pipeline. At this time, first close the feeding valve, open the discharge valve, and discharge the remaining rubber in the plastic barrel. Then, close the discharge valve and open the feeding valve. , Activate the machine, press the solvent out and rinse according to the usual operation mode.
2. The lifter of the machine's quantitative cylinder needs to be regularly lubricated to increase the service life; regularly (once a week), add a high temperature lithium base grease 2-3 gun to the grease nipple with a grease gun.
3. The air pressure is abnormal and water vapor is found. Please remove the water vapor in the pressure regulating filter or check whether the air pressure source is abnormal.
4. Please wipe the machine part regularly to increase the service life.